ONA AF80
ONA AF-80 Bridge Design, Large Format Wire EDM Ona AF-80 Wire EDM. AF-Modular provides custom configuration of equipment based on the needs of the user. High cutting speed of 42 in2/minute with wire of 0.013 in diameter and 34 in2/minute with wire of 0.010 in diameter). Surface Integrity is maintained by eliminating electrolyte corrosion without reduction in cutting speed. Ona uses an "ecological filtration" system that aids in low maintenance requirements. The ONA AquaPrima system eliminates replaceable cartridges.
Machine Type: | CNC Wire |
---|---|
CNC Standard Model: | Ona |
Frame Type: | Bridge |
Submersible: | Standard |
IS THIS YOUR COMPANY?
Max Part Size (L x D x H): | 59.000" x 40.000" x 19.000" 1498.600mm x 1016.000mm x 482.600mm |
---|---|
Max Part Size (L x D x H) Opt: | 27.000" 685.800mm |
Worktank (L x D x H): | 76.800" x 63.000" x 23.600" |
Max Taper Angle: | 30.0000° |
---|---|
Min Hole Diameter: | 0.0100" |
Max Wire Diameter: | 0.0100" |
Auto Rethreading: | Standard |
Auto Restart After Power Out: | Standard |
Auto Slug Removal: | Optional |
Anti-electolysis power supply: | Standard |
Auto Second Cut: | Standard |
Start Hole Device: | Optional |
Number Of Axes: | 6 |
---|---|
X Axis Travel: | 39.400" |
Y Axis Travel: | 23.600" |
Y Axis Travel Opt: | 39.400" |
Z Axis Travel: | 19.700" |
Z Axis Travel Opt: | 27.500" |
U Axis Available: | Standard |