ONA AF60
ONA AF-60 Bridge Design, Large Format Wire EDM Ona AF-60 Wire EDM. Modular design for easy configuration of equipment for the customer requirements. High cutting speed of 42 in2/minute with wire of 0.013 in diameter and 34 in2/minute with wire of 0.010 in diameter). Ona uses an "ecological filtration" system that aids in low maintenance requirements. The ONA AquaPrima system eliminates replaceable cartridges.
Machine Type: | CNC Wire |
---|---|
CNC Standard Model: | Ona |
Frame Type: | Bridge |
Submersible: | Standard |
IS THIS YOUR COMPANY?
Max Part Size (L x D x H): | 51.000" x 40.000" x 19.000" 1295.400mm x 1016.000mm x 482.600mm |
---|---|
Max Part Size (L x D x H) Opt: | 51.000" x 27.000" 1295.400mm x 685.800mm |
Worktank (L x D x H): | 76.800" x 63.000" x 23.600" |
Max Taper Angle: | 30.0000° |
---|---|
Min Hole Diameter: | 0.0100" |
Max Wire Diameter: | 0.0100" |
Auto Rethreading: | Standard |
Auto Restart After Power Out: | Standard |
Auto Slug Removal: | Optional |
Anti-electolysis power supply: | Standard |
Auto Second Cut: | Standard |
Start Hole Device: | Optional |
Number Of Axes: | 6 |
---|---|
X Axis Travel: | 31.500" |
Y Axis Travel: | 23.600" |
Y Axis Travel Opt: | 39.400" |
Z Axis Travel: | 19.700" |
Z Axis Travel Opt: | 27.500" |
U Axis Available: | Standard |