Cell-Con H-15D Duplex
H-15D Duplex Generous 24″X21″X18″ work envelope for each of the two opposing spindles, allowing simultaneous machining of two sides of a part on a single setup. Each spindle runs independently or synchronously through GE Fanuc Cimplicity CNC. 15-hp, ISO 40 taper spindle standard with 2000, 3000, or 6000 RPM. Feedrates to 600 IPM (15.24 MPM). 6-tool ATC standard with optional 12-tool ATC for each spindle. Specify the optional 4-position index table for increased productivity. Fourth axis rotary table available for contouring.
Machine Type: | Machining Center |
---|---|
Num. of Axes: | 6 |
Operation Type: | CNC |
CNC Brand: | GE Fanuc Cimplicity |
IS THIS YOUR COMPANY?
Table Size L x W (in.): | 29.000(L) x 18.250(W) |
---|---|
Table Size L x W (in.) Opt: | 34.250(L) x 21.660(W) |
Max Workpiece Weight (lbs): | 1,000 |
Support Index Table: | Optional |
Support Rotary Table: | Optional |
Direction: | Horizontal |
---|---|
Taper: | ISO 40 |
Top RPM: | 2,000 |
Top RPM Opt: | 3,000 |
HP (30 min rating): | 15.00 |
U Axis: | None |
Tool Carrier: | ATC |
---|---|
Num. Tools: | 6 |
Num. Tools Opt: | 12 |
Tool Change Time (sec): | 6.00 |
Tool Change Chip Time (sec): | 8.00 |
Pallet Changer Available: | Optional |
Num. Pallets: | 2 |
Num. Pallets Opt: | 5 |
Num. Axes: | 6 | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Num. Axes Opt: | 7 | ||||||||||||||||||||||
U Axis: | None | ||||||||||||||||||||||
|