Nakamura-Tome NTJ-100
This compact multi-function turning center packs a lot into a small footprint. With turning capacity at 6.9" diameter and turning length up to almost 27", the NTJ-100 can produce large parts with complex features in one operation. The 10-axis turning center can machine with two tools simultaneously on the same part or two parts in either spindle. The swivel turret (B/Y-axis) enables any milling, engraving, helical or 3D operation. The machine can be tooled up with 54 tools (up to 24 of them live.)
| Machine Style(s): | Bar, Chucker |
|---|---|
| Spindle Direction: | Horizontal |
| Operation Type: | CNC |
| CNC Type: | Fanuc 31i |
| Main Spindle Turning Diameter Max: | 6.890" |
|---|---|
| Main Spindle Turning Length Max: | 26.690" |
| Main Spindle Chuck Diameter: | 6.000" |
| Main Spindle Bar Diameter Max: | 1.650" |
| Main Spindle Bar Diameter Opt: | 2.500" |
| Tail Stock Quill And Body: | None |
| Num. Main Spindles: | 2 | |||||
|---|---|---|---|---|---|---|
| Main Spindle 1: |
|
|||||
| Main Spindle 2: |
|
| Primary Tool Carrier: | Upper Turret | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max Tools: |
|
||||||||
| Rotary Tool: |
|
||||||||
| Second Tool Carrier: | Lower Turret | ||||||||
| Max Tools: |
|
||||||||
| Rotary Tool: |
|
||||||||
| Num. Simultaneous Cutting Tools: | 2 | ||||||||
| Secondary Mill/Drill Function: |
|
| Number Of Axes: | 10 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
