Builder

ADF Systems Ltd.

Headquarters
ADF Systems Ltd.
1302 19th Street North
Humboldt, IA 50548
www.adfsys.com
515-332-5400

800-959-1191
Fax: 515-332-4475


PROFILE
 
All ADF Parts Washers are environmentally friendly using hot water and detergents as the cleaning source. Depending on your application, ADF can supply rotary basket, top and front load models, manual tank type, pass through, glove box, agitation, dip tanks, drawer type, tumbler style, auger, conveyor or flow through and other models, including spray booth. In addition, if you have a special requirement, ADF can build or customize a washer for your applications. Reviewing some of the custom and special built machines from ADF you will see the versatility of equipment which ADF can supply.

Also available is an extensive list of options which allows you to modify our parts washers to your application.

From it's modern manufacturing facility in Humboldt, Iowa, including it's in-house engineering department, modern, up-to-date equipment and fully integrated manufacturing functions, ADF supplies the most complete line of equipment in the Industry. Only the finest materials are used in our equipment.

ADF Pressure Washers are built for heavy use in industrial, commercial, and agricultural applications. Models are available with 1000 psi, 1500 psi, 2000 psi, 2500 psi, and 3000 psi, as well as other performance factors. With the addition of a selection of accessories, pressure washers can be adapted for various requirements.

ADF and it's distributors participate in Fairs and Shows where you can view a fine selection of ADF Pressure Washers.

ADF's Parts Washers can be seen at regional, national and international trade shows. We show a small selection at the shows but information and consultation is available on all equipment including custom built-to-order equipment.
PRODUCT CATEGORIES
  • Cleaning & Degreasing Equipment, Aqueous
  • Dust Collectors & Air Filtration
  • Solvents & Degreasing Agents
CHANNEL PARTNERS
amt Modern Machine Shop Production Machining Moldmaking Technology