ONA AF100
ONA AF-100 Bridge Design, Large Format Wire EDM Ona AF-100 Wire EDM. AF-Modular handles very large parts up to 22,000 lbs. 6 axes are CNC controlled including X, Y, Z, U, V, and B axes. Wire spool up to 100 Lbs. High cutting speed of 42 in2/minute with wire of 0.013 in diameter and 34 in2/minute with wire of 0.010 in diameter). Surface Integrity is maintained by eliminating electrolyte corrosion without reduction in cutting speed. Ona uses an "ecological filtration" system that aids in low maintenance requirements. The ONA AquaPrima system eliminates replaceable cartridges.
Machine Type: | CNC Wire |
---|---|
CNC Standard Model: | Ona |
Frame Type: | Bridge |
Submersible: | Standard |
IS THIS YOUR COMPANY?
Max Part Size (L x D x H): | 76.000" x 63.000" x 23.000" 1930.400mm x 1600.200mm x 584.200mm |
---|---|
Worktank (L x D x H): | 76.800" x 63.000" x 23.600" |
Max Taper Angle: | 30.0000° |
---|---|
Min Hole Diameter: | 0.0100" |
Max Wire Diameter: | 0.0100" |
Auto Rethreading: | Standard |
Auto Restart After Power Out: | Standard |
Auto Slug Removal: | Optional |
Anti-electolysis power supply: | Standard |
Auto Second Cut: | Standard |
Start Hole Device: | Optional |
Number Of Axes: | 6 |
---|---|
X Axis Travel: | 59.100" |
Y Axis Travel: | 39.400" |
Y Axis Travel Opt: | 51.200" |
Z Axis Travel: | 23.600" |
Z Axis Travel Opt: | 27.500" |
U Axis Available: | Standard |