Grinding Machine Model


More Information:


Michael Deckel S11 SPEED
5-Axis Manual Tool Grinder with Fully Rotating Tool Slide, Grinding Head & Head Bracket

PRODUCT
Michael Deckel S11 Manual Universal Tool and Cutter Grinder
Michael Deckel S11 Tool and Cutter Grinding Machine

S11speed - the ultimate in tool-grinding

The S11 from DECKEL has been specifically designed for grinding modern precision tools. With the S11, single tools and small batches can be ground amazingly fast, economically and with versatility - and all this with the highest operating ease. An ideally balanced variety of ingenious accessories ensures optimum and individual adaptation to specific grinding tasks.

The universal indexing head for precision at any position
- Horizontal axis rotating 360 degrees, vertical axis swivelling 360 degrees
- Locating points for the opto-electronic measuring system
- Integrated dividing unit for pure one-hand operation
- Worm-gear controlled radial fine feed
- Disengageable 180 degree stop for quick zero positioning

Spiral and relief grinding attachment - simple and versatile
In combination with the universal indexing head, the spiral and relief grinding attachment transforms the longitudinal motion of the tool slide into the desired spiral form. Thus, you can easily and precisely grind faces and flanks on twisted left-hand and right-hand cutting tools as well as countersinks, taps, step drills and form cutters.

Radius grinding attachment
With the radius grinding attachment for the S11, you can grind perfect radii on any tools, no matter whether convex, concave or straight, angular or twisted flutes. Even for difficult accessible radii or for flanks on radius tools with twisted flutes, the S11 provides proof of its really impressive strength: Transitionless grinding of radius and peripheral flanks in one single pass. This unique method of comfortable radius grinding is only offered by the S11 from Deckel.

Opto-electronic measuring system
It is indispensable for grinding form tools: During the grinding process, precision linear measuring systems take up the movements, the electronic system displaying the measurements in digital form - down to a resolution of one hundredth of a mm.  The microscope is ideal for the estimation of the surface quality.

Video measuring system
Working with the microscope for a long time is tiring and a strain on the eyes. The video measuring system makes easier for the user the strenuous focusing of the tool with the aid of a video camera and transmits the image to a color monitor. The latter shows a three-dimensional image of the tool and, at the same time, permits assessment of the surface quality. The video measuring system can be retrofitted to all S11 measuring systems using a microscope and consists of a CCD color camera, a 14" color monitor, a camera bracket and a monitor console.

Dressing unit
For a variety of different wheel profiles. In addition to end faces and to conical and cylindrical surfaces, you can dress convex or concave radius surfaces as well as profile surfaces.

Motor drive
For fitting to the universal indexing head. Running in clockwise and anticlockwise sense, for simple cylindrical grinding. Indexing head spindle speed:
100 to 1000 r. p. m., operating voltage: 220 V

Support arm assembly
The steady with tailstock centre and support can be clamped into the indexing head, thus following each swivelling motion. Various tailstocks and centers permit the precise resharpening of straight and tapered tools. Available tailstock designs: Special tailstock (see opposite picture), cross-adjustable tailstock, height-adjustable tailstock.

Handwheel attachment
For short-stroke motions of the tool slide, for example, to grind side-and-face mills.

Machine vice
For simple structural parts and tools. Swivelling in three axes (vertical 360 degrees, lengthwise 180 degrees, crosswise 90 degrees); jaw width 80 mm, opening 80 mm.

Tool cabinets
They accommodate all tool holders and make them immediately ready to hand.

 
SPECS

S11 SPEED

5-Axis Manual Tool Grinder with Fully Rotating Tool Slide, Grinding Head & Head Bracket
Grinder Type: Tool & Cutter
Machine Opertaion: Manual
WORKPIECE ENVELOPE
Grinding Length: 37.008 Inches Opt. 20.866 Length: 940.000 mm   Opt. 530.000
OD Grinding Diameter(s) Max: 13.307 (Max Opt:24.409 Inches) Max: 338.000 mm (Max Opt: 620.000 mm)
GRINDING WHEEL AND SPINDLE
Grinding Wheel Dia.: 5.000 Inches  Opt. 8.000    Dia.: 127.000 mm  Opt. 203.200   
Wheel Head Motor: 1.50 hp Motor: 1.10 kW   4,000 rpm  Opt: 8,000 rpm   Angle Adjustment: 360.000°
Workhead Motor: 1.70 hp Motor: 1.30 kW    Speed: 2,000 rpm  Opt. 10,000 rpm
AXES SPECIFICATIONS
Travel Max Feed Rapid Rate
Longitudinal 7.480 Inches 190.000 mm
Cross 3.937 Inches 100.000 mm
Vertical 12.795 Inches 325.000 mm
WEIGHTS AND MEASURES
Machine Length: 43 Inches 1,100 mm
Machine Width: 31 Inches 800 mm
Machine Height: 69 Inches 1,760 mm
Machine Weight: 1,100 lbs 500 kg
CHANNEL PARTNERS
amt Modern Machine Shop Production Machining Moldmaking Technology