Argo Seiki A-100
Argo Seiki A-100 Vertical Machining Center A-100 Spindle taper ISO#40 (optional ISO#50 15HP)(optional 20HP), Spindle speeds 8000rpm. Rigid tapping is up to 6000rpm. X/Y/Z-axis rapid traverse 24/24/20m/min shorten idle time. Umbrella type magazine (capacity 20 pieces). Touch-key type control panel with good appearance, durable and easy operation. Double floating counter-balance weight and air-accumulator fully eliminate sinusoidal vibration problem on Z-axis. Every machine is precisely measured by laser interferometer system, ball-bar testing equipment, spindle dynamic balance adjustment, spindle speeds instrument,and so on.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 3 |
| Operation Type: | CNC |
| CNC Brand: | Fanuc 0iM-B |
| CNC Brand Opt: | Meldas |
| Table Size L x W (in.): | 49.610(L) x 24.020(W) |
|---|---|
| Support Index Table: | Optional |
| Support Rotary Table: |
| Direction: | Vertical |
|---|---|
| Taper: | #50 |
| Taper Opt: | |
| Top RPM: | 8,000 |
| HP (30 min rating): | 15.00 |
| HP Opt: | 20.00 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 20 |
| Num. Tools Opt: | 24 |
| Tool Change Time (sec): | 3.00 |
| Tool Change Chip Time (sec): | 5.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
