TongTai TMV-610A (APC)
Topper Tong Tai TMV-610 APC 30 Taper Drill Tap Machine with Auto Pallet Changer 40 taper with Automatic Pallet Change Meehanite cast iron frame and linear slide ways for fast, precise movement Preloaded double anchored ball screws Direct coupled ball screw to servo Rigid tapping standard Auger conveyor inside of bed for rear discharge 3 layer mechanical seal and air blow curtain design for front spindle bearing to prevent coolant contamination Reinforced pull stud mechanism Arm type tool changer machine with coolant through spindle Front mounted rotary APC Column traveling machine with APC for easier setup APC time (0-180 degree) 5 seconds Fully enclosed APC guard Optional hydraulic fixture control from center
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 3 |
| Operation Type: | CNC |
| CNC Brand: | Fanuc |
| CNC Brand Opt: |
IS THIS YOUR COMPANY?
| Table Size L x W (in.): | 24.000(L) x 20.000(W) |
|---|---|
| Table Size L x W (in.) Opt: | 158.000(L) x 20.000(W) |
| Max Workpiece Weight (lbs): | 800 |
| Direction: | Vertical |
|---|---|
| Taper: | #40 |
| Taper Opt: | |
| Top RPM: | 8,000 |
| Top RPM Opt: | 10,000 |
| HP (30 min rating): | 10.00 |
| HP Opt: | 15.00 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 12 |
| Num. Tools Opt: | 24 |
| Tool Change Time (sec): | 2.20 |
| Tool Change Chip Time (sec): | 4.20 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
