Tos Varnsdorf WHR 13
The horizontal boring and milling machine with telescopic ram and the workspindle type WHR / WRD 13 (Q) is based on the original generation of CNC horizontal milling and boring machines WHN (Q)13 CNC of TOS VARNSDORF a.s. (Joint-stock Company) production range and is offered with a spindle diameter of 130 mm. It is available in the table version – model WHR 13 (Q) or the floor version - model WRD 13 (Q). The machines feature four axle contouring (X – stand or table cross travel, Y – headstock vertical adjustment, Z – ram longitudinal extension, V – stand or table longitudinal adjustment, W – sliding workspindle). Machines can be controlled with HEIDENHAIN iTNC 530 HSCI, Sinumerik 840 D-SL or FANUC 30i /31i control systems.
| Machine Type: | Boring Mill Machining Center |
|---|---|
| Num. of Axes: | 5 |
| Operation Type: | CNC |
| CNC Brand: | Heidenhain iTNC 530 HSCI |
| CNC Brand Opt: | Fanuc 31i |
| Table Size L x W (in.): | 86.600(L) x 70.860(W) |
|---|---|
| Max Workpiece Weight (lbs): | 26,500 |
| Support Index Table: | None |
| Support Rotary Table: | Standard |
| Direction: | Horizontal |
|---|---|
| Taper: | #50 |
| Top RPM: | 3,000 |
| HP (30 min rating): | 50.00 |
| U Axis: | Optional |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 40 |
| Num. Tools Opt: | 120 |
| Tool Change Time (sec): | 15.00 |
| Tool Change Chip Time (sec): | 0.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 5 | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Num. Axes Opt: | 6 | ||||||||||||||||||||||
| U Axis: | Optional | ||||||||||||||||||||||
|
|||||||||||||||||||||||
IS THIS YOUR COMPANY?
