[ No Image Available ]

Willis Machinery & Tools 1050 II

Willis 1050 II Vertical Knee Milling Machine 1050ll-EV 1250ll No more changing of worn out pulley bushings and keys Extremely low maintenance Accurate RPM readings Direct drive belts - no belt slippage Reduced energy consumption All New Electronic VARIABLE Speed - "EV" Dynamically balan ced pulley with special bronze key attached with 2 screws prevents premature breakage. Our standard spring type micrometer adjusting nut provides quick and easy movement for setting spindle depth. Our special power down feed parts are so strong, they can be used over 3,000 RPM spindle speeds. Our 1 piece cluster gear is superior to the much used 3 piece design. SPECIFICATIONS 1050II 1250II Table Dimensions 50" x 10" 50" x 12" Travels -- Longitudinal/ Cross (Manual) 34" x 17" 32" x 17" Vertical Knee Travel 18" 18" T-Slots (3) 5/8" 5/8" Ram Travel 21" 24" Ram Swivel 360� 360� Quill Diameter 3-3/8" 4-1/8" Spindle Motor 3 HP 5 HP Spindle Speeds (variable) 60-4200 60-4200 Spindle Taper R8 or 30 40 Taper Quill Power Feed Rates (Inches Per Revolution) 0.00032" 0.0017" 0.0053" 0.00032" 0.0017" 0.0053" Head Tilting Left to Right (Degrees) 90-0-90 90-0-90 Head Tilting Front to Back (Degrees) 45-0-45 Fixed Spindle Nose to Table (Min./Max.) 3" - 20" 2" - 20" Center of Spindle to Column Face (Min./Max.) 3" - 24" 6" - 28" Ground Way Surface Width 4-1/8" 4-1/8" Saddle Width 21" 21" Knee Width 15-1/2" 15-1/2" Knee Height 20-1/4" 20-1/4" Longitudinal Power Feed Optional Optional Longitudinal Rapid Traverse Longitudinal Feed Motor Optional Optional Table Rising Motor Optional Optional Coolant Pump 1/8 HP(opt) 1/8 HP (opt) Net Weight 3,300lbs. 3,700 lbs. Maximum Work Piece Weight 1100 lbs. 1100 lbs. Machine Dimenisions 68"x65"x92" 68"x65"x92"

3 HP Variable Speed Vertical Knee Mill with Optional Longitudinal Power Feed & Table Rising Motor
Num. of Axes: 5
CNC Brand:
CNC Brand Opt:
Table/Work Support
Table Size L x W (in.): 50.000(L) x 10.000(W)
Max Workpiece Weight (lbs): 750
Spindle(s)
Direction: Vertical
Taper: R-8
Taper Opt: # 30
Top RPM: 4,200
HP (30 min rating): 3.00
Tooling
Tool Carrier: Manual
Num. Tools: 1
Num. Tools Opt: 1
Tool Change Chip Time (sec): 0.00
Axes And Travels
Num. Axes: 5
U Axis: None
Travel Max Feed Rate Rapid Traverse
X1
Y1
Z1 5.000"
A1 180.000°
B1 360.000°
Manufacturing machine
Manufacturing machine
Mastercam 2025 Now Available
Chevalier's FMG-B1224/1640
DN Solutions
Hurco
Iscar
DN Solutions