FastCut TAL22

THE BEST SOLUTION FOR SHAFTS AND TUBES LONGER THAN 1.5 METERS THAT NEED TURNING ON BOTH ENDS. THE MACHINE CAN ACCEPT A WIDE RANGE OF LENGTHS FOR OTHER FAMILY PARTS. THE CENTER SPINDLE POSITION IS PROGRAMMABLE AND HAS A VERY SHORT CHANGE OVER TIME FOR DIFFERENT PARTS. TAL22 SHAFT/TUBE TURNING FROM LENGTH 250MM TO 2500MM 30 TWINS CENTER SPINDLE LATHE TAL22 29 THE SPECIALLY DESIGNED SIDE DOOR LOADING SYSTEM MAKES LOADING LONG SHAFTSEASY TAL22 has a twin center spindle, the machine can clamp the middle section of a shaft or tube even though it might be as long as 2.5 meters. Both spindles are located on the guide ways, so the clamping position can easily be adjusted over a wide range. Also, one of turrets has been designed so that it can cross over the center spindle. This means the machine can turn with one center spindle and both turrets at the two ends. This design gives the machine excellent flexibility for turning a very wide range of parts with different lengths