Fuji HM-3000
Fuji HM-3000 Machining Center Fuji HM3000A powerful milling cell capable of 5-face machining in a single chucking. Combine with a turning cell for increased throughput and reduced cost per piece. Choice of built-in FUJI gantry or swing arm type robots Simultaneous 4-axis control Live tool spindles mounted on turret Slant hole machining capability on B-axis with a fixed angle axial holder Select from 6, 10, or 15 position turret
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 4 |
| Operation Type: | CNC |
| CNC Brand: | Fanuc 210i-MB |
| CNC Brand Opt: |
| Direction: | Horizontal |
|---|---|
| Taper: | Fuji 2.6" |
| Taper Opt: | |
| Top RPM: | 5,000 |
| HP (30 min rating): | 7.50 |
| Tool Carrier: | TURRET |
|---|---|
| Num. Tools: | 10 |
| Num. Tools Opt: | 15 |
| Tool Change Chip Time (sec): | 0.00 |
| Num. Axes: | 4 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
