Horkos HFN-P40H
Horkos HFN-P40H Horizontal Machining Center HORKOS HFN-P40H A CNC Rotary table, a CNC Tilting Rotary table and an auto pallet changer may be mounted because the bed has a fixture mounting face. When using the fixture inversion device, swarf is never accumulated on the fixture. Vibration absorbing material (polymer concrete) in the cavity of the machine ensure optimal stability during the most difficult interrupted cuts. The highly rigid yet lighter weighted cross column unit enables high speed axis travel without sacrificing accuracy or power.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 3 |
| Operation Type: | CNC |
| CNC Brand: | Fanuc 18i-M |
| CNC Brand Opt: |
| Table Size L x W (in.): | 26.000(L) x 16.000(W) |
|---|---|
| Support Index Table: | Optional |
| Support Rotary Table: | Optional |
| Direction: | Horizontal |
|---|---|
| Taper: | HSK-A63 |
| Taper Opt: | |
| Top RPM: | 15,000 |
| HP (30 min rating): | 10.00 |
| HP Opt: | 25.00 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 16 |
| Num. Tools Opt: | 24 |
| Tool Change Time (sec): | 1.90 |
| Tool Change Chip Time (sec): | 4.20 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Num. Axes Opt: | 4 | ||||||||||||||||||
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
