Sharp LMV
These vertical knee mills are equipped with vari-speed drive, available with optional digital vari-speed. The dove tail ways chromed, and the box ways are hardened and ground. Premium packages can include 3-axis DRO on the Quill, Table, and Saddle and Power Feed table.
| Num. of Axes: | 3 |
|---|
| Table Size L x W (in.): | 42.000(L) x 9.000(W) |
|---|---|
| Max Workpiece Weight (lbs): | 800 |
| Direction: | Vertical |
|---|---|
| Taper: | R-8 |
| Taper Opt: | #30 |
| Top RPM: | 4,500 |
| HP (30 min rating): | 3.00 |
| U Axis: | None |
| Tool Carrier: | MANUAL |
|---|---|
| Num. Tools: | 1 |
| Num. Tools Opt: | 1 |
| Tool Change Chip Time (sec): | 0.00 |
| Pallet Changer Available: | None |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
