XV1250A

YCM XV1250A

YCM XV1250A Vertical Machining Center XV1020A Shown Unique IDD Spindle Design ▲The spindle motor is directly coupled to the spindle. This unique IDD spindle design successfully reduces noises, backlash, and vibration which are found normally from the spindles driven by belt or gears. ▲The spindle is driven by FANUC's high torque Vector Drive AC spindle motor. ▲The wall of the head stock is symmetrically designed which allows the entire head stock to homogeneously absorb the thermal expansion and avoids thermal deformation. ▲The unclamping cushion protects the spindle bearings from the tool unclamping force, which extends the spindle life. ▲CNC controller receives the feedback of spindle spee d which can ensure the best performance of rigid tapping. ▲To enhance spindle cutting rigidity, this machine offers large spindle diameter of 70mm and up to 12mm thickness of spindle wall. ▲Newly developed technology with positive air flow prevents the spindle bearings from being contaminated by coolant mist and fine chips during high speed cutting. ▲Every time the machine changes its tool, the standard accessory of spindle air blast will automatically clean the spindle taper. Exceptional Accuracy ▲The XV series is built to handle the tight-tolerance work on a 24/7 basis. This is accomplished by using high quality components and no shortcuts are taken through our manufacturing process. ▲Every XV machine passes the tests of ball-bar and laser calibration to ensure the highest standard in the industry.

15 HP Vertical Machining Center
Machine Type: Machining Center
Num. of Axes: 3
Operation Type: CNC
CNC Brand: Fanuc MXP-100FA
CNC Brand Opt:
Table/Work Support
Table Size L x W (in.): 53.100(L) x 20.500(W)
Max Workpiece Weight (lbs): 2,200
Support Index Table: Optional
Support Rotary Table:
Spindle(s)
Direction: Vertical
Taper: #40
Taper Opt:
Top RPM: 10,000
HP (30 min rating): 15.00
Tooling
Tool Carrier: ATC
Num. Tools: 24
Num. Tools Opt: 30
Tool Change Time (sec): 3.50
Tool Change Chip Time (sec): 5.50
Pallet Changer Available: Optional
Axes And Travels
Num. Axes: 3
Num. Axes Opt: 4
U Axis: None
Travel Max Feed Rate Rapid Traverse
X1 50.000" 394 945ipm
Y1 20.500" 394 945ipm
Z1 21.300" 394 945ipm
Manufacturing machine
Manufacturing machine
DN Solutions
Chevalier's FMG-B1224/1640
Iscar
Hurco
Mastercam 2025 Now Available
Mastercam 2025 Now Available