Kira KN-40Hb
KN-40Hb has a non moving, fixed table. All movements are in the column. These features allow the workpiece to remain stationary and even extend outside of the enclosure. Application; Ends work on long shaft, beams cylinders, axles, tubes etc. Application; Heavy fixtures mounted to a fixed table. Heavy parts, complicated hydraulics or electrical cabling can be used because the fixture does not move. The X, Y, and Z strokes are on the column. Application; Several KN-40Hb can be placed side by side for progressive processing as an inline transfer system. Overhead Gantry, Lift and Carry or Robot part handling apply well to this small footprint Kira Horizontal.
| Num. of Axes: | 3 |
|---|---|
| Operation Type: | CNC |
| CNC Brand: | Fanuc 21i-MB |
| CNC Brand Opt: |
IS THIS YOUR COMPANY?
| Table Size L x W (in.): | 27.600(L) x 15.700(W) |
|---|---|
| Table Size L x W (in.) Opt: | 35.400(L) x 15.700(W) |
| Max Workpiece Weight (lbs): | 1,100 |
| Direction: | Horizontal |
|---|---|
| Taper: | # 40 |
| Taper Opt: | |
| Top RPM: | 8,000 |
| Top RPM Opt: | 12,000 |
| HP (30 min rating): | 10.00 |
| HP Opt: | 7.50 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 20 |
| Num. Tools Opt: | 40 |
| Tool Change Time (sec): | 1.50 |
| Tool Change Chip Time (sec): | 3.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
