Willis Machinery & Tools WM3VS

Willis WM3VS Manual Vertical Knee Milling Machine with Variable Speed Head WM3VS Dynamically balanced pulley with special bronze key attached with 2 screws prevents premature breakage. Our standard spring type micrometer adjusting nut provides quick and easy movement for setting spindle depth. Our special power down feed parts are so strong, they can be used over 3,000 RPM spindle speeds. Our 1 piece cluster gear is superior to the much used 3 piece design. No more changing of worn out pulley bushings and keys Extremely low maintenance Accurate RPM readings Direct drive belts - no belt slippage Reduced energy consumption All New Electronic VARIABLE Speed - "EV" SPECIFICATIONS WM3VS Table Dimensions 49" x 9" Travels -- Longitudinal/ Cross (Manual) 36" x 13" Vertical Knee Travel 16" T-Slots (3) 5/8" Ram Travel 17" Ram Swivel 360� Quill Diameter 3-3/8" Spindle Motor 3 HP Spindle Speeds (variable) 60-4200 Spindle Taper R8 Quill Power Feed Rates (Inches Per Revolution) 0.00032" 0.0017" 0.0053" Head Tilting Left to Right (Degrees) 90-0-90 Head Tilting Front to Back (Degrees) 45-0-45 Spindle Nose to Table (Min./Max.) 3" - 18" Center of Spindle to Column Face (Min./Max.) 3" - 20" Ground Way Surface Width 2-1/2" Saddle Width 18" Knee Width 12" Knee Height 17" Longitudinal Power Feed Optional Longitudinal Rapid Traverse Longitudinal Feed Motor Optional Table Rising Motor Optional Coolant Pump 1/8 HP (opt) Net Weight 2,400 lbs. Maximum Work Piece Weight 750 lbs. Machine Dimenisions 61"x64"x82"