Traub TNL 12
Traub TNL Series Sliding Headstock Turning Centers - High production rates due to simultaneous machining with up to four tool carriers at two identical spindles; 0.3 sec chip-to-chip time - Two tool carriers with X- and Z-axis and six stations each for driven tools - Front and rear working each have one tool carrier, which have four stations per carrier - Minimal tool interference because of the patented arrangement of four tool carriers in two intersecting planes - Universal tooling, short setup times using the comprehensive tooling system, the patented tool mounting and preset tool holders - Good accessability in spite of the compact architecture; exterior dimensions are independent of equipment options
| Machine Style(s): | Bar, Swiss |
|---|---|
| Spindle Direction: | Horizontal |
| Operation Type: | CNC |
| CNC Type: | TX8i-s |
IS THIS YOUR COMPANY?
| Main Spindle Turning Diameter Max: | 0.630" |
|---|---|
| Main Spindle Turning Length Max: | 5.120" |
| Main Spindle Bar Diameter Max: | 0.520" |
| Main Spindle Bar Diameter Opt: | 0.630" |
| Sub Spindle Turning Diameter Max: | 0.630" |
| Tail Stock Quill And Body: | None |
| Num. Main Spindles: | 1 | |||||
|---|---|---|---|---|---|---|
| Main Spindle 1: |
|
|||||
| Main Spindle 2: |
|
|||||
| Sub Spindle (Standard): |
|
| Primary Tool Carrier: | TURRET | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max Tools: |
|
||||||||
| Rotary Tool: |
|
||||||||
| Second Tool Carrier: | TURRET | ||||||||
| Max Tools: |
|
||||||||
| Rotary Tool: |
|
||||||||
| Num. Simultaneous Cutting Tools: | 4 | ||||||||
| Secondary Mill/Drill Function: |
|
| Number Of Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number Of Axes Opt: | 7 | ||||||||||||||||||
| Number Of Axes Opt 2: | 7 | ||||||||||||||||||
|
|||||||||||||||||||
